.. currentmodule:: taurus.qt.qtgui.plot

.. _trend_ui:

=============================
TaurusTrend User's Interface
=============================


.. contents::

.. todo:: These docs need to be updated to the taurus_pyqtgraph implementation


The :class:`TaurusTrend` widget is the standard way for Taurus applications to
graphically show the evolution of one or more **scalar** attributes from the control
system.

.. figure:: /_static/taurustrend03.png
  :align: center

The value of the scalar attributes is plotted in a Y axis with incrementing X
value each time an event from this attribute is received. The X values can
either be an index for the event number or a timestamp value. See
`Timestamp VS "event number" mode`_ for more details.

TaurusTrend has many features in common with :class:`taurus_pyqtgraph.TaurusPlot`. Please
check the :ref:`TaurusPlot User's Interface Guide <taurusplot_ui>` for learning about
them. In the following, only those features that are exclusive of TaurusTrend are
discussed.


.. _standalonetaurustrend:

TaurusTrend as a stand-alone application
-----------------------------------------

You may also use TaurusTrend as a stand-alone application for showing trends of
attributes from the control system. You can launch the stand-alone TaurusTrend
with the following command::

    taurus trend [options] [<model_list>]
	
Run the following command for more details::

    taurus trend --help

    
The model list is optional and is a space-separated list of models for TaurusTrend. 
Valid models are: SCALAR or 1D attribute names (1D attributes will be treated
as collections of scalars). See :class:`TaurusTrend` API for more information about valid models   


Timestamp VS "event number" mode
---------------------------------

When TaurusTrend receives an event from an attribute, it plots the attribute value
against either:

- the sequential order of arrival of the event (i.e., the *event number*), or
- the *timestamp* associated with this value. See
  :ref:`Date/time support <taurusplottime>` for more information.

When TaurusTrend is part of a GUI, this behavior is set by that GUI. If TaurusTrend is
used as a stand-alone application, the behavior is determined by the `-x`
parameter (see the `TaurusTrend as a stand-alone application`_ section).

The timestamp mode is in general the most used one, but it is important to be
aware that the timestamp will only be as accurate as the (distributed) control
system allows (not all attributes will, typically, be controlled by a centralised
high-accuracy clock). See the `Known limitations`_ section for more details.


The Fixed-range X scale
-----------------------

When working with trends, you may want to see the latest changes only. For
example, you may be interested in seeing the changes occurred within the last 5
minutes (assuming you are working in time scale) or only the latest 20 values
(if you were working in "event number" mode).

You can switch the `Fixed-range X scale` mode on and off from either:

- The :ref:`Context Menu <taurusplotcontextmenu>` (under the `Scales` submenu)
- The :ref:`Plot Configuration dialog <plotconfiguration>` (under the
  `X axis` sub-menu). Here you can choose from suggested values or simply
  type a range:
  
    .. image:: /_static/taurustrend-fixedRange01.png


Using a spectrum as a collection of scalar values
--------------------------------------------------

TaurusTrend plots the evolution of *scalar* values. However, in many occasions the
1D attributes are (ab)used in the control system as a way of packing
a set of scalar values together.

For this reason, TaurusTrend allows you to plot
trends of 1D attributes assuming that each item in the spectrum is an
independent scalar number (e.g., a 1D attribute of length 8 will be plotted as 8
separate curves).

Obviously, all curves related to a single SPECTRUM attribute will be updated
simultaneously, since events are received per attribute.

.. figure:: /_static/taurustrend02.png
  :align: center

Accessing archived values
-------------------------

.. todo:: this feature is to be provided by the taurus-tangoarchiving_ plugin


Forced read of attributes
-------------------------

Some attributes of the control system may be set to only send events when their
value changes. In the case of TaurusTrend, this behaviour causes that attributes
that do not change often, do not get new points in the trend and thus may seem
to have been "lost". To avoid this issue, you can instruct the TaurusTrend to
periodically force re-read the attributes being displayed. You can enable this
feature (and set the re-read period) from the :ref:`Context Menu <taurusplotcontextmenu>`
 
If launching the TaurusTrend as a stand-alone application, you can also enable this
at launch time by passing the `-r` option (see the `TaurusTrend as a stand-alone 
application`_ section).

Keep in mind the following:
  
- Setting very frequent re-reads may impact your control system and GUI
  performance. Specially if you are plotting several attributes. **So, do not
  use this feature unless it is really needed**


Known limitations
-----------------

Limited timing precision when comparing two attributes
''''''''''''''''''''''''''''''''''''''''''''''''''''''''

If two different attributes are plotted in the same trend, their times may appear
slightly out-of-synch. For example, two parameters that are known to vary
simultaneously may be apparently 0.5 seconds apart. 

This occurs because TaurusTrend relies on the control system timestamps for
assigning the time values. Therefore, its precision is limited by that of the
control system for the given parameters.

Note that timestamps for an attribute may be assigned using the internal
clock of the machine hosting the device server. Therefore, attributes managed
by different machines may only be compared to the extent of the synchronization
of the corresponding internal clocks. In such a case, keeping all machines
synchronized is highly recommended (e.g., using NTP_, accuracy should not be 
worse than 0.1s).

.. _trend2d_ui:

========================
Spectrograms (2D trends)
========================

The :class:`TaurusTrend2DDialog` widget is the standard way for Taurus 
applications to graphically show the evolution of a one-dimensional 
attribute. The representation is done as a *spectrogram*: the time (or 
event number) is represented in the X axis while values of the array 
are color-coded along the Y axis.


.. figure:: /_static/taurustrend2d.png
  :align: center

Several tools from the standard guiqwt_ toolkit for images are available,
and zooming and panning are possible using the standard mechanisms of 
guiqwt_.

The :class:`TaurusTrend2DDialog` widget can be launched as a 
stand-alone application with the following command::

	taurus trend2d <array_attribute_name>

Run the following command for more details::

    taurus trend2d --help


.. _guiqwt: https://pypi.python.org/pypi/guiqwt
.. _taurus-tangoarchiving: https://gitlab.com/taurus-org/taurus_tangoarchiving
.. _NTP: http://en.wikipedia.org/wiki/Network_Time_Protocol
